Supply filter

Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% for 0.3 micron

Pre-Filter

Pre-filters are made from Non-woven synthetic with HDPE mesh; conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron

Fresh Air Filter

Fresh Air filters are made from Non-Woven Synthetic with HOPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10 micron

Motor blower assembly

Motor blower designed of statically"and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirement for entire life of HEPA.

Pressure Gauge

Dwyer Make Magnehelic Gauge (0 -25 mm: 1 Nos.) to monitor pressure drop across HEPA.

Door

SS 304 doors with double walled flush glass view panels and door closer

Interlocking

Electro-Magnetic interlocking arrangement to put-off UV Light if either side door opens.

Shelves

SS 304 hanging arrangement (or) removable type shelves

Temperature Control

Heater with thermostat for control of temperature

ON/OFF Switches

SS ON/OFF Switches for motor & lights

Switch Socket

6/15 Amp Single phase switch socket use for external equipment

DOP Port

DOP test port at upstream of HEPA filter integrity test. ( With PAO Solution)

Vibration Level

Minimum

Electric Supply

230V AC 1- Ø S5OHZ / 415V AC 3-Ø 50HZ

Noise Level

Less than 67 dB on Scale 'A' when Ambient is not greater than 55 dB on Scale 'A'