Ceiling Suspended Vertical Laminar Air Flow

HEPA Filter

Imported Minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency rating better than 99.999% for 0.3 micron

Pre-Filter

Pre-filters are made from Non-woven synthetic with HDPE mesh; conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron

Motor blower assembly

Motor blower designed of statically"and dynamically balanced for supply of sufficient Capacity and static pressure to take care of airflow requirement for entire life of HEPA.

Pressure Gauge

Dwyer Make Magnehelic Gauge (0 -25 mm: 1 Nos.) to monitor pressure drop across HEPA.

Lighting

Fluorescent Light with milky white diffuser (250 Lux) at work surface

ON/OFF Switches

SS ON/OFF Switches for motor & lights

Switch Socket

6/15 Amp single-phase switch socket use for external equipment

Control Panel

Electrical control Panel mounted in unit

Work Table

SS work table with due reinforcement

DOP Port

DOP test port at upstream of HEPA filter integrity test. ( With PAO Solution)

Side Panel

Glass side panel screens for maximum visibility

Electrical Supply

230V AC 1-   50HZ / 415V AC 3-  50HZ

Noise Level

Less than 67 dB on Scale 'A when Ambient is not greater than 55 dB on Scale 'A'

Vibration Level

Minimum

Air Flow

Vertical